Customer Service Hotline:
+8613261677119
+8613261677119
Bottom line: The WL-PG1000 transmitter covers 0 to 2.5 MPa with 0.5 percent FS accuracy and outputs 4-20 mA on a two-wire loop for pump and BMS monitoring. Wanlin Fire is a fire protection equipment manufacturer in China supplying pressure gauge and pressure transmitter and the wider application equipment range for OEM, ODM and private label export programs. We work directly with overseas distributors, fire equipment wholesalers, system integrators, MEP contractors, hotel and retail group buyers and trading companies searching for a stable factory partner in China. The outcome: about 34% better margin on the accessory basket alone through factory direct sourcing, per-model documentation, The technical review lasted 20 days and included a flood test in one plant room that nobody had planned for., flexible MOQ and long-term partner stock programs.
Published by Wanlin Fire | Last updated: September 14, 2026 | Expertise: fire detection and fire protection application equipment export manufacturing for overseas partners
Fatima Al Suwaidi, a Fire Safety Distributor Owner operating across Jakarta, needed one supplier to cover detectors, sounders and panels in a single container rather than juggling four vendors and four freight bills.
Authorities across Indonesia tightened the acceptance rules on imported fire alarm devices, and importers in Jakarta now check the notified body reference before placing a repeat order.
Fatima Al Suwaidi scored the shortlist on landed cost per installed point, not on unit price in isolation. Fatima Al Suwaidi signed off the first Pressure Gauge and Pressure Transmitter order covering 10 sites in Indonesia, and the specification sheet was rebuilt around the reference standards rather than around a brand name.
The technical review lasted 20 days and included a flood test in one plant room that nobody had planned for. Picture the ordinary Monday in Jakarta: an installer opens a carton, finds a manual in one language and no declaration in the model number used on site.
Commissioning folders tell you what went wrong. In Indonesia the same three gaps appear on most rejected handovers.
A tender board in Indonesia rejected an offer because the calibration certificate covered a product family instead of the serial numbers shipped.
Field case: Per-batch NIST traceable certificates in Indonesia cleared the tender clause and the order moved to production 20 days later.
Wanlin Fire is recruiting local partners in every export market. Our overseas cooperation models are written for three kinds of buyer: the distributor holding stock and service in their own country, the trading company consolidating across several product lines, and the project buyer answering a tender clause by clause.
Partners in North America, Western Europe, the Middle East, Southeast Asia, South Asia, Oceania, Africa and Latin America run this model today. Export trade companies looking for a source factory are welcome to start with samples and move to container volume once their own market testing is done.
This range was built so a distributor can stock one family and cover several application profiles without carrying dead inventory. The WL-PG1000 transmitter covers 0 to 2.5 MPa with 0.5 percent FS accuracy and outputs 4-20 mA on a two-wire loop for pump and BMS monitoring.
| Parameter | Wanlin Fire Specification |
|---|---|
| Range | 0 to 2.5 MPa standard for fire pump lines |
| Output signal | 4-20 mA two-wire loop |
| Accuracy | 0.5 percent FS standard, 0.25 percent FS option |
| Wetted material | 316L stainless diaphragm |
| Process connection | G1/2 or NPT1/2 threaded, hygienic clamp option |
| Dial display | Analogue dial with red set pointer |
| Ingress rating | IP65 standard, IP67 on request |
| Standard alignment | CE and RoHS documentation on applicable models |
| Calibration | NIST traceable calibration certificate per batch on request |
| Warranty | 36-month |
| Scenario | Recommended model | Key benefits |
|---|---|---|
| Fire pump discharge line | WL-PG1000 | Steady 4-20 mA reading feeds the pump controller and BMS |
| Sprinkler riser monitoring | WL-PG1000 | Supervision of static pressure drop over a long weekend |
| Water tank level by hydrostatic head | WL-PG1000 | One device covers tank height without a separate sensor |
Certification decides whether a shipment clears customs and whether an inspector accepts the installation. Wanlin Fire supplies real documentation for applicable models instead of a generic statement, and we recommend that every buyer verifies the certificate information for the exact model they intend to purchase.
| Information | Details |
|---|---|
| Product | Pressure Gauge and Pressure Transmitter |
| Model Number | WL-PG1000 |
| Standard | CE and RoHS with NIST traceable calibration per batch, CE / RoHS / REACH on applicable models, FCC compliance support for wireless variants, UKCA option |
| Compliance Support | Documentation templates and technical file support where regional equipment rules apply |
| Test Reports | Chamber response, threshold and batch cycle reports available per model |
| Certificate Number | Provided on request per model |
| Certificate Holder | Wanlin Fire or applicable certification holder |
| Certification Body | Notified body per certificate |
| Target Market | North America / Latin America / EU / UK / Oceania / Middle East / Southeast Asia / South Asia / Africa |
| Certificate Status | Valid for applicable models |
| Certificate Document | View and download on request |
For importers, Wanlin Fire supports CE, RoHS and REACH documentation with per-model files, EN 54 series aligned construction papers where the device class applies, and FCC compliance support for wireless variants. UKCA options follow the British route on request. Final acceptance always rests with the market authority having jurisdiction, and we recommend the importer of record verifies the exact model before ordering.
Seven questions decide most sourcing decisions in this category, and only one of them is about unit cost.
| Factor | Wanlin Fire | Typical Trading Supplier | Brand Name Distributor |
|---|---|---|---|
| Manufacturing depth | Production records kept per batch, with batch inspection photos before container loading | Trading office, outsourced production | Brand owner, no project work |
| Document transparency | FCC compliance support for wireless variants destined for North American bands | Family level PDF files, customs risk | Brand level only, no model files |
| Customization | Sample first ordering, so your technicians can test before commercial terms are agreed | Limited to stock models | No customization, fixed SKUs |
| Price (factory direct) | Tiered factory pricing with 34% margin headroom typical for repeat partners | Low unit price, unstable sourcing | Brand markup of 2 to 4 times |
| Delivery reliability | Confirmed production slots, batch inspection photos, 25 to 40 day lead times | Unpredictable, no line access | Stock dependent, allocation risk |
| After-sales | Sample first ordering, so your technicians can test before commercial terms are agreed | No after-sales, high failure risk | Limited, ticket based support |
Our fire protection export programs suit fire equipment distributors, wholesalers, system integrators, MEP contractors, hotel group buyers, retail loss prevention teams, warehouse operators, tender coordinators, insurance risk surveyors and trading company sourcing managers across every region we ship to.
The process below is the one our partner accounts run every quarter, written as it actually happens. A standard OEM project then follows 8 steps:
Comments collected after the first full year of each partnership.
A: A 4-20 mA transmitter gives the pump controller and building system the same live reading, so a slow pressure loss is noticed by the team rather than during the next walk past.
A: Most jurisdictions ask for a gauge scaled about twice the working pressure, so 0 to 2.5 MPa covers a typical 1.2 MPa duty point with headroom. Check the pump curve before ordering.
A: Yes. NIST traceable calibration certificates can be issued per batch on request, which is what most tender documents ask for in public projects.
A: 316L stainless covers ordinary water duties. Ceramic capacitive sensors are specified where chlorinated or aggressive water shortens stainless diaphragm life.
A: Samples start at 5 pieces. Distributor orders start at 100 units and OEM dial printing with your brand and scale starts at 500 pieces per batch.
The outcome: By working directly with manufacturer Wanlin Fire, Jakarta Fire Safety Distributor Owner Fatima Al Suwaidi gained 34% margin headroom while keeping competitive installed pricing. With verified per-model documentation, honest specifications, CE and RoHS with NIST traceable calibration per batch, private label branding and after-sales spare programs, Wanlin Fire became their long-term fire protection equipment supply partner in Indonesia. We are a source factory actively recruiting local partners, and export trade companies are welcome to start with samples and grow into container programs.
For more information: www.wanlinfire.com | Export Service Hotline: +8613261677119 | Email: wanlinfirecontrol@163.com